The products and services mentioned below were selected independent of sales and advertising. However, Simplemost may receive a small commission from the purchase of any products or services through an affiliate link to the retailer's website.
I live in a 71-year-old house. The plumbing is all original. I know, all too well, the rising panic that claws into one’s chest as a flushed toilet suddenly starts to fill, and fill … and fill, with no sign of stopping.
Lifehacker recently shared the, uh, technique. It’s simple but a bit tricky, especially if you’re dealing with a truly unpleasant backup. Still, when you’re down a plunger, you’ve just gotta go with plan B — or plan C.
We’re going to say that Plan B is to use plastic wrap, which almost everyone has in their kitchen. Using as many sheets as you need, cover the bowl tightly with the wrap to create a good seal.
Meanwhile, Plan C is to use a garbage bag if you’re out of plastic wrap. You’ll also want to create a seal with the bag, so bust out some tape to keep things wrapped up tight. Use as much as you need because the seal is what will make this possible.
Time to get to work: Flush the blocked toilet, then push down on the middle of your plastic wrap/trash bag seal, over the bowl, forcing air down into the toilet. Don’t get too crazy here — you certainly wouldn’t your hand to go straight into the pot. Hopefully that’s enough to solve the trouble. If it’s still not flushing correctly, give it a few more tries, making sure your seal is strong.
If you’re a visual learner, here’s a little TikTok to use as a reference:
And if you’ve got to use a garbage bag — or even just a large plastic grocery bag you have laying around — this lady has a good tip:
No word yet on what a professional plumber would think of all this, so proceed with caution. And maybe just save this for the worst-case, no-plunger scenario!